
ROWAphos 100g
Removes 3 ppm of phosphate from about 400L

ROWAphos by the numbers

What is ROWAphos?
ROWAphos was originally patented and chemically engineered in Germany. Utilising a highly porous structure, it delivers the largest adsorption capacity when compared to other commercial phosphate removers.

Feed your fish, not your algae
Phosphate feeds nuisance algae, which can overrun plants and corals. In the reef aquarium it will also disrupt the calcification process used by corals to build their skeletons.
ROWAphos is easy to use, improves water quality, supports SPS growth and curbs nuisance algae.
Since algae rarely takes a day off, regular use of ROWAphos is highly recommended.
Why choose ROWAphos?
An exceptional phosphate removal capacity of 40g per kg in both freshwater and saltwater aquariums.
Continues to remove phosphate effectively even below 0.05 ppm.
Does not release phosphate back into the water when saturated, so there is no rush to remove exhausted media.


For best results
Use D-D's Fluidised Media Reactor to maximise the efficiency of ROWAphos in your aquarium.
Easy to use and reliable performance.
Before & After
See how using ROWAphos can eradicate nuisance algae


Five available sizes
Same patented media in every pack. Pick the size that suits your system.
| Pack | 100g | 250g | 500g | 1000g | 5kg |
|---|---|---|---|---|---|
| Removes 3 ppm PO₄ from approx. | 400L / 105 US gal | 1000L / 265 US gal | 2000L / 525 US gal | 4000L / 1050 US gal | 20000L / 5280 US gal |
| Media bag included | Yes | Yes | No | No | No |
| Find a stockist | Find a stockist | Find a stockist | Find a stockist | Find a stockist |
Use with D-D's Fluidised Media Reactor for best results.
Which size?
Tell us your system volume and water type and we will recommend the optimal pack for you.
Water type
Effective volume 400 L

Removes 3 ppm of phosphate from about 400L
Guide values based on removing 3 ppm of phosphate (PO₄). For the ongoing dose, use 25g per 100L and follow the instructions as removing phosphate too fast can stress corals.
Technical Specifications
| Material | Ferric hydroxide (patented, made in Germany) |
|---|---|
| Removes | Phosphate (PO₄) and silicate |
| Adsorption capacity | 40g PO₄/kg |
| Effective down to | < 0.05ppm PO₄ |
| Recommended dose, saltwater | 25g per 100L |
| Sizes | 100g · 250g · 500g · 1000g · 5kg |
| Systems | Freshwater & saltwater |
For saltwater aquariums use 25g per 100L in a suitable reactor such as D-D's FMR75 fluidised media reactor. Always follow the instructions as removing phosphate too fast can stress corals.
In freshwater aquariums, use 12g-15g per 100L of aquarium water in a dedicated reactor or in your aquarium filter using a suitable fine media bag or trapped between layers of filter wool.
Yes, ROWAphos effectively removes phosphate and silicate from freshwater.
No, ROWAphos does not release phosphate back into the system when saturated. There is no need to remove exhausted media immediately, so you can get the most out of each use.
Yes, ROWAphos continues to remove phosphate effectively even below 0.05 ppm.
Regular use is highly recommended. Algae rarely takes a day off, so constant use keeps phosphate levels low and nuisance algae in check.
No, ROWAphos is a patented ferric hydroxide made only by ROWA. Other iron-based media have a different chemical structure and different properties.
For use in a fluidised reactor we recommend that you wash the media in R.O. water prior to use to remove the fines, which would otherwise over-fluidise and end up in the aquarium. If this happens it will not cause any harm to the inhabitants as it is inert but it may look unsightly for a while.
ROWAphos
Available through specialist aquarium retailers worldwide.