Skip to content

Funktion Wave

Powerful flow. Precise control.

The range of 3 Funktion Wave pumps

Funktion Wave by the numbers

13,000L/h
3,430 GPH. Max flow rate (largest model)
4
Adjustable flow modes
30-100%
Adjustable power range
3
Models in the range

About Funktion Wave

Compact wave pumps with full digital control for saltwater and freshwater aquariums.

Compact open puck design delivers a powerful, widespread flow. Precise digital control allows you to create everything from gentle currents to natural reef surges.

Pump shown in multi angle positions

Multi-angle adjustment

Effective flow in multiple directions

Funktion Wave pumps fit neatly into tight spaces and smaller aquariums without dominating the view.

Waterproof magnetic mounts let you place the pump anywhere on the glass or weir. An included cup shaped mount allows easy angle adjustment.

Why choose Funktion Wave

Compact design. Flexible flow.

  • Compact, quiet design

    The compact open puck design delivers wide, even flow without dominating the view. Smooth ceramic impeller bearings and a soft anti-vibration jacket on the magnetic mount keep the pump running quietly.

  • Magnetic mount with angle adjustment

    The waterproof magnetic mount holds the pump securely, with easy angle adjustment to direct flow exactly where it is needed.

  • Unique digital controller

    Three adjustable wave functions – Wave, Pulse and Storm – plus a constant flow mode, all easily set using the included touch button controller.

  • Efficient 4-pole motor

    The low voltage four-pole motor delivers low heat output, energy efficiency and long term durability.

  • Wear-resistant ceramic shaft & bearings

    Wear resistant ceramic bearings and impeller shaft allow smooth, reliable operation for many years.

  • Fish and anemone guard included

    Every pump includes a fish and anemone guard that helps you protect smaller livestock and invertebrates from the pump inlet.

Funktion Wave Pump and All Parts

Flow Modes

One pump. Four ways to move water.

The digital controller lets you switch between constant flow and three adjustable wave functions at the touch of a button.

Funktion Wave pump on the aquarium glass producing a steady, straight stream of flow over a reef in Pump mode.
Step 1 of 4
Funktion Wave Controller with backlit colour display

Digital controller

Precise control at your fingertips.

A backlit colour LCD and touch controls allow true stand-alone operation, with simple, intuitive adjustment.

Choose a flow mode, fine-tune power and frequency, and pause the pump at feeding time, all from one compact controller.

Controller features

  • Multi-function digital controller

    A unique controller with a touch-button control pad puts every setting at your fingertips.

  • Backlit LCD colour display

    A clear colour screen with adjustable brightness, multi-language display and screen saver.

  • Four flow modes

    Switch between four different flow modes at the touch of a button.

  • Adjustable power

    Set minimum and maximum power from 30% to 100% in Wave, Pulse and Constant modes.

  • Precise frequency control

    Fine tune the Wave and Pulse frequency from 0.5 to 10 seconds in 0.1 second increments.

  • Feed mode and run-dry protection

    Feed mode and on/off functions, plus run-dry detection with automatic shutdown.

Optional fish & anemone guard for Funktion Wave pump.

Included

Fish & anemone guard

Every Funktion Wave pump comes with an attachable guard that fits the back of the pump, ideal for aquariums with small fish or invertebrates such as anemones that may settle near the inlet.

While it cannot completely stop very small fish or the softer parts of an anemone from entering the pump body, it greatly reduces the risk.

Comparison

Three sizes, one clever design.

Every model shares the same control functions, modes and magnetic mount, so simply choose by how much flow you want and the thickness of your aquarium glass.

Three sizes, one clever design.
Model
Funktion Wave 4000

Funktion Wave 4000

Up to 4,000 L/h (1,057 GPH)

Funktion Wave 10000

Funktion Wave 10000

Up to 10,000 L/h (2,642 GPH)

Funktion Wave 13000

Funktion Wave 13000

Up to 13,000 L/h (3,430 GPH)

Maximum flow4,000 L/h (1,060 GPH)10,000 L/h (2,640 GPH)13,000 L/h (3,434 GPH)
Maximum power10W20W30W
DimensionsDiameter × height64×52mm (2.5×2.0in)76×55mm (3.0×2.2in)82×63mm (3.2×2.5in)
Maximum glass thickness10mm (0.39 in)15mm (0.59 in)19mm (0.75 in)
Voltage24V24V24V
Cable length3m (9.8ft)3m (9.8ft)3m (9.8ft)
Digital controllerYesYesYes
Pump, Wave, Pulse & Storm modesYesYesYes
Fish & anemone guardIncluded in the boxYesYesYes
SystemsFreshwater & saltwaterFreshwater & saltwaterFreshwater & saltwater
Warranty1 Year1 Year1 Year
Find a stockistFind a stockistFind a stockist

Use two or more pumps for higher flow rates or create different flow patterns.

Compact by design

Which size?

Find your Funktion Wave in ten seconds.

Enter your aquarium volume and choose your aquarium type, and we’ll recommend a model.

Aquarium type

L≈ 106 US gal

Frequently asked questions

Which Funktion Wave pump is right for my aquarium?

The Funktion Wave range includes three models with maximum flow rates of 4,000L/h, 10,000L/h and 13,000L/h. The best choice depends on your aquarium's size, livestock and circulation requirements. Use our pump selector to find the suggested model.

Can Funktion Wave pumps be used in freshwater and saltwater aquariums?

Yes. Funktion Wave Pumps are suitable for both freshwater and saltwater aquariums, including reef, fish-only and planted systems.

What are the different flow modes?

Funktion Wave offers three adjustable wave functions and a constant flow mode, allowing you to create anything from steady circulation to changing, dynamic water movement.

Are Funktion Wave pumps quiet?

Yes. The low voltage, energy efficient 4-pole motor and wear resistant ceramic shaft are designed to provide smooth, quiet and reliable operation. Please note: new pumps may require a running-in period of between 1 and 2 weeks to achieve quietest running.

Is the fish and anemone guard included?

Yes. Every Funktion Wave Pump includes a fish and anemone guard, which can be fitted to help reduce the risk of aquarium inhabitants being drawn into the pump.

Can I adjust the pump's flow rate?

Yes. The digital controller allows you to adjust the pump's output and customise the water movement to suit your aquarium.

Can I use more than one Funktion Wave pump?

Yes. Multiple pumps can be placed around the aquarium for better circulation and more varied flow. Each pump operates independently and is controlled individually, linking or grouping pumps together is not supported.

How do I clean the pump?

Disconnect the pump from the power supply before removing it from the aquarium. Carefully dismantle the pump following the user manual and clean the impeller, ceramic shaft and housing using a soft brush and fresh water. For stubborn calcium deposits, use a suitable aquarium pump cleaning solution such as D-D Ezeclean. Rinse thoroughly and reassemble before use. Avoid abrasive materials or harsh chemicals.

What is the maximum glass thickness the pump mount is suitable for?

The maximum recommended glass thickness depends on the model:

Funktion Wave 4000: 10mm

Funktion Wave 10000: 15mm

Funktion Wave 13000: 19mm

Where to buy

Funktion Wave. Simply the clever choice.

Available through specialist aquarium retailers worldwide.