Skip to content

Fluidised Media Reactor

For fluidising ROWAphos, bio pellets and filter sand or running other non-fluidised media such as carbon.

D-D FMR75 fluidised media reactor with its box and the 1,000 l/h feed pump from the FMR75+

D-D Fluidised Media Reactor by the numbers

700ml
ROWAphos or bio pellet capacity
340mm
Fluidising column between the perforated plates
360°
Dished base to allow even flow with no dead spots
25mm
Wide mounting clamp to allow installation on the rim of a tank

Flexible Filtration

The compact reactor designed for a wide range of media in freshwater & saltwater systems

The Fluidised Media Reactor is flexible and ideal for every hobbyist. It is cost effective, can fit a small tank or be used with several units on a larger system, with no compromise on design or build.

asd

Why choose the Fluidised Media Reactor?

A new standard in reactor design

  • Efficient fluidisation

    The dished base spreads an even flow from the central downpipe through 360° preventing dead spots. Flow rate is adjustable via the included tap and by built-in flow adjustment on the front of the pump housing.

  • Fast restart, no compacting

    A lower perforated diffusion plate prevents media blocking the inlet of the reactor when the pump is off and leaves an empty plenum for faster fluidisation on restart.

  • Media stays in the reactor

    An upper perforated plate and a fine sponge help to keep media in the reactor body where you want it to stay.

  • Top up without emptying

    The central feed tube is separate from the lid, so tube and media stay put while you top up. No screws to undo either, simply twist the lid to unscrew and remove.

  • Stand it, hang it, clamp it

    Position it inside or beside the sump, hang it from the sump, or clamp it directly to the aquarium using the mounting bracket integrated into the lid. Inlet and outlet elbows can be rotated, so pipework runs in the direction you need it to.

  • No back-siphoning

    The supplied non-return valve stops water and media quickly siphoning back through the pump in a power cut, simple but effective.

FMR75 fittings: three lengths of clear tubing, a flow adjustment tap, a non-return valve and cable ties

FMR75

What's in the box?

The Fluidised Media Reactor comes with three lengths of tubing, non-return valve, flow adjustment tap, two grades of media sponge and eight cable ties to secure the pipework.

FMR75+ Body and pump

FMR75+

Why the FMR75+

Choose the FMR75+ model and benefit from a highly efficient 1000L/h pump.

Comparison

Two options to suit your setup

Same reactor, same fittings. With or without a pump? You choose.

Two options to suit your setup
Version

Fluidised Media Reactor - FMR75

Reactor, add the pump of your choice

Fluidised Media Reactor & Pump - FMR75+

Reactor + 1000L/h feed pump

Reactor with lid, perforated plates and feed tubeYesYes
Tubing, non-return valve and flow tapYesYes
Fine and coarse media spongesYesYes
Feed pumpNo1000 L/h
Best forROWAphos and other media that need gentle fluidisationBio pellets or larger media volumes
DimensionsIncluding fittings and lid128 × 94 × 440mm (5.0 × 3.7 × 17.3 in)
Freshwater & saltwaterYesYes
Find a stockistFind a stockist

The FMR75+ 1000L/h pump is specified for bio pellets or larger media volumes and can deliver more flow than a smaller amount of ROWAphos needs. For gentle fluidisation or smaller media volumes choose the FMR75 and a smaller pump.

ROWAphos phosphate remover in 5 pack sizes

For best results

Use the D-D Fluidised Media Reactor with ROWAphos

Trusted by aquarists worldwide, ROWAphos is a high-performance phosphate removal media for freshwater and saltwater aquariums.

For optimal results, use ROWAphos in the D-D Fluidised Media Reactor to provide gentle, controlled fluidisation. The recommended dosage for saltwater aquariums is 25g per 100L.

Set up for your media

One reactor, three options

Fit the sponges or leave them out to suit your preferred media.

One reactor, three options
Media

ROWAphos

up to 700ml

Bio pellets

up to 700ml

Carbon

and other non-fluidised media

Upper fine spongeYesNoNo
Lower coarse spongeYesNoYes
FluidiseGentlyYesNo
Water flowapprox. 500L/hStrong, the FMR75+ pump is specified for bio pelletsGentle flow
Recommended versionFMR75 with a small pumpFMR75+FMR75 or FMR75+

When using bio pellets the perforated plates keep them inside the reactor without the sponges. Carbon should be un-fluidised to prevent the media breaking down. Other media may need a little experimentation.

Technical Specifications

The Fluidised Media Reactor at a glance

Fluidised Media Reactor · FMR75 / FMR75+

The Fluidised Media Reactor at a glance
Dimensions (incl. fittings and lid)128 × 94 × 440mm, 5.0 × 3.7 × 17.3 in
Reaction tube outer diameter80mm, 3.1 in
Tube height between perforated plates340mm, 13.4 in
Hangs on glass up to25mm, 0.98 in
Pipe17mm OD × 14mm ID, 0.67 × 0.55 in
Hang-on heightMade for a 15" tall sump, stands in shorter, hangs on taller
ROWAphos and bio pellet capacityup to 700ml, 23.7 US fl oz
Feed pump (FMR75+ only)1000L/h, 264 US gal/h
Pump size H × W × L (FMR75+ only)100 × 60 × 90mm, 3.9 × 2.4 × 3.5 in
Suitable forROWAphos, bio pellets, carbon, filter sand and more
Systemsfreshwater & saltwater

Frequently asked questions

FMR75 or FMR75+, which do I need?

The FMR75+ adds a 1000L/h feed pump, specified for fluidising bio pellets. For media that needs gentle fluidisation, such as ROWAphos, choose the FMR75 and a smaller pump.

What can I run in it?

ROWAphos and other phosphate removers, bio pellets, carbon, biological sand as well as many other types of filter media.

Which sponges do I fit?

No sponges for most bio pellets, the perforated plates hold them in. The upper fine and lower coarse sponge for ROWAphos, just the lower coarse sponge for carbon and other non-fluidised media.

Should I fluidise carbon?

No. Carbon does not need to tumble, set the flow so it stays put, preventing abrasion which may cause the media to break down.

Will media wash out when the pump starts?

The upper perforated plate and fine sponge help to hold back finer filter media during start-up. With bio pellets, leave the upper sponge out, the plate still keeps them in.

Do I need the non-return valve?

If the reactor sits above the water level, yes, fit it on the OUTLET of the reactor to stop water and media siphoning back through the pump if the power goes off.

Positioned level with the aquarium's water line so the reactor cannot drain down, the non-return valve is not needed.

Can I install it outside the sump?

Yes. Once you have chosen the position, set the elbows at the right angle and bond them to the lid spigots with aquarium silicone or solvent-weld adhesive, then secure every hose with the cable ties supplied. Inside the sump is still best however as any water stays in the system in the event of a leak.

The media will not fluidise, what is wrong?

Check the pipes, the feed must go into the spigot in the centre of the lid.

No flow at all with the pump running? The non-return valve is probably the wrong way round or there is a blockage.

Make sure the flow adjustment on the front of the pump is open.

The FMR75+ pump is noisy when I turn the flow tap down, what now?

Restricting the pump flow too much can stall its impeller or cause excess backpressure. Fit a T-piece and a second valve (not included) in the feed line to divert the excess flow back to the sump, so the pump can run unrestricted.

D-D Fluidised Media Reactor

Simply the clever choice.

Available through specialist aquarium retailers worldwide.