Skip to content

Clarisea Gen 3

Here comes the fleece filter that does more!

The clever choice for highly efficient filtration with minimal maintenance, all at exceptional value for money.

ClariSea by the numbers

3,000l/h
SK-3000 G3 — 790 gal per hour
5,000l/h
SK-5000 G3 — 1,320 gal per hour
40m
Phosphate-free, low-odour fleece per roll
8–10weeks
Expected lifespan of one roll

ClariSea Gen 3 · SK5000

Gen 3 in 3D.

Clarisea Engineering. At its Best.

Use the arrow keys to rotate the model, and 0 to reset the view.

Goodbye filter socks

Automatic removal of waste, detritus, uneaten food, microalgae and fine particles. Before they break down in your aquarium.

These compact roller filters fit both freshwater and saltwater systems. They eliminate the need for annoying filter socks and their constant cleaning.

The result? Improved water clarity, enhanced light penetration for healthier coral and plant growth, reduced nitrate and phosphate build-up - and a much easier life for your protein skimmer.

SK-3000 vs SK-5000

Two sizes, one clever design.

Same Gen 3 body, controller and 40 m roll - pick by the flow your return pump delivers and the volume you keep.

Two sizes, one clever design.
Model
ClariSea SK-5000 Gen 3 automatic fleece filter with two 40 m XL QuickChange rolls

ClariSea SK-3000 G3

Up to 3,000 l/h · 790 gal/h

ClariSea SK-5000 Gen 3 automatic fleece filter with two 40 m XL QuickChange rolls

ClariSea SK-5000 G3

Up to 5,000 l/h · 1,320 gal/h · Recommended

Recommended flow3,000 l/h5,000 l/h
Recommended aquariumGuide value, normal stockingup to 600 lup to 1,200 l
Fleece width10 cm15 cm
Optimal water depth10 cm
Submerged depth5–20 cm
Inlet adaptor32 mm / 40 mm / 1"
Fleece rollIncluded in the box40 m
Roll life8 - 10 weeks
Smart controller & alarmsYesYes
Fail-safe overflowYesYes
Water bypassYesYes
SystemsFreshwater & saltwater
Find a stockistFind a stockist

Optional clean-roll positioning kit available for space-constrained sumps.

See it run

ClariSea in motion.

Watch the fleece advance, the float rise and the controller take over - the whole cycle in under a minute.

Studio footage — the final film follows the shoot script.

How it works

Consistent filtration, around the clock.

The smart controller advances the fleece as it becomes dirty - automatically, or at the push of a button.

ClariSea universal inlet adaptor connected to a return pipe
Step 1 of 5

Which size?

Find your ClariSea in ten seconds.

Tell us your aquarium volume and how heavily you feed - we recommend the model and estimate roll life.

Stocking / feeding

L≈ 106 US gal
ClariSea SK-3000 G3

ClariSea SK-3000 G3

The compact Gen 3 unit for sumps up to 600 l effective volume - silent, self-cleaning fleece filtration with the smart controller built in.

Flow
3,000L/h
Expected roll life
≈9–11weeks

Guide values. Very heavy bioload, breeding systems or coral propagation may need the larger unit or two units in parallel.

Gen 3 details

Every part rethought.

Scroll through what changed in the third generation.

  1. Top rollers with fleece guides
    Step 1 of 5

    Top rollers with fleece guides

    Reduce tension on the fleece, ensuring smoother operation over time.

    Gen 3Roller design
  2. ClariSea Gen 3 body with quick-release silencer plates
    Step 2 of 5

    Quick-release silencer plates

    Reduce noise, water splashes and salt creep even further — and lift off without tools.

    0Tools needed
  3. The drop-in fleece holder
    Step 3 of 5

    Drop-in fleece holder + removal tool

    Roll changes are quick and simple — while the unit stays in the sump.

    40 mPer roll
  4. Upgraded Gen 3 motor and cruciform
    Step 4 of 5

    Integrated water bypass

    Control how heavily your water is filtered — valuable flexibility for feeding, tank medication or general flow management.

    1Lever
  5. Universal inlet adaptor close-up
    Step 5 of 5

    Fully assembled body, universal inlet

    Quick and easy installation; the universal inlet adaptor fits 32 mm, 40 mm and 1" pipework.

    32 · 40 · 1"Inlet sizes

Before / after

Everything the fleece caught.

Slide to compare a fresh roll with one after weeks in the sump - none of it reached your aquarium.

Drag or use the arrow keys to reveal more of New roll or Used roll.
Detritus, uneaten food and microalgae — removed automatically before they break down.

Extra safe

Audible and visual alarms - a glance tells you everything is running smoothly.

Tap a state to see what the controller shows and what to do.

Gallery

Up close.

  • Fleece removal tool
  • Upgraded motor and cruciform
  • Top rollers with fleece guides
  • Universal inlet adaptor
  • Drop-in fleece holder
  • Fully assembled body

Downloads

Guides & parts, one click away.

Everything you need for setup and maintenance - as PDF.

Frequently asked questions

Which model do I need?

Match the recommended flow to your return-pump throughput and sump water depth (5–20 cm submerged, 10 cm optimal). As a guide: SK-3000 G3 up to about 600 l, SK-5000 G3 up to about 1,200 l. Use the finder above.

How often do I change the roll?

A 40 m roll typically lasts eight to ten weeks. The controller alerts you when the roll is empty; the drop-in holder means you change it without lifting the unit out of the sump.

Does it work in freshwater?

Yes — ClariSea Gen 3 fits both freshwater and saltwater systems, including fish-breeding and coral-propagation set-ups.

What does the water bypass do?

It lets you decide how much of the flow passes through the fleece — handy when feeding, medicating or tuning overall flow.

What happens if the fleece jams?

The controller stops advancing, flashes red and sounds an alarm; the integrated fail-safe overflow lets water pass so your return pump never runs dry.

ClariSea Gen 3

Simply the clever choice.

Available through specialist aquarium retailers worldwide.

Its cool

The drop-in fleece holder and fleece removal tool make roll changes quick and simple, while the unit remains in the sump.